01C&I, QSR and clinics
FluidPod
An 8.5 kVA storage unit that takes the diesel genset out of the daily routine.
- Output
- 8.5 kVA, single-phase
- Usable storage
- 10–12 kWh, LFP
- Changeover
- Under 20 ms
- Expansion
- Up to four units in parallel
Storage infrastructure for Indian sites
Power that keeps its word.
We build battery systems and the software that runs them, for sites where a power cut is not an inconvenience. It is a lost shift, a spoiled batch, a dark clinic.
- storage deployed
- 9.4 MWh
- packs in service
- 2,800+
- cities monitored
- 74
India does not have a generation problem. It has a timing problem.
Power is generated in the afternoon and needed in the evening. It is available at one feeder and needed at another. The grid balances this minute by minute, and most of the time it succeeds.
When it does not, the cost lands on the site. A genset is the usual answer: expensive, idle most of the year, and unreliable exactly when it is needed. Storage is the answer that works on the ordinary days too.
How we think about storageFour places where the same gap appears.
Different loads, different failure costs, the same missing layer between the grid and the work.
Food service
₹30+per unit, diesel
A kitchen mid-service cannot restart a fryer and wait. Storage carries the line, and the genset stays cold.
Clinics and cold chain
20 mschangeover
Vaccines, samples and imaging equipment do not tolerate a gap. The transfer is fast enough that the equipment never sees it.
Warehouses and dark stores
30%fuel saved
Forklifts, chillers and pack lines in one shed. Storage takes the base load and leaves the genset for the long outages.
Fleets
2,800+packs in service
Two-wheelers, three-wheelers and material handling run all day. Telemetry on every pack keeps the route from becoming the failure point.
Four systems, one platform.
Each product is a different shape of the same idea: cells, a battery management system, and FluidTwin watching both.
02Homes, clinics and offices
FluidPower
Smart backup with four-tier load prioritisation and app control.
- Output
- 3–5 kVA
- Usable storage
- 5–10 kWh, LFP
- Load tiers
- Four, user-adjustable
- Changeover
- Under 20 ms
03Battery platform
FluidPack
One LFP platform, three pack formats for two-wheelers, three-wheelers and material handling.
- Chemistry
- Lithium iron phosphate (LFP)
- Formats
- 2.7 kWh, 9.6 kWh, 19.8/22 kWh
- Telemetry
- Per-cell voltage and temperature
- BMS
- Shared firmware across formats
04Digital twin
FluidTwin
The platform that watches every unit, forecasts the next few hours and dispatches storage as one resource.
- Visibility
- Live, per site and per pack
- Dispatch window
- 6–10 PM peak tariff
- Reserve policy
- Per-site backup floor
- Integration
- Modbus, MQTT, REST
When the power drops, the order matters.
A normal inverter treats a fridge and an air conditioner as the same problem. FluidPower and FluidPod sort the site into four tiers and protect them in order, so the reserve goes where it is worth the most.
The tiers are set once and then run on their own. You can override them from the app, but you do not have to be watching when the power goes.
- 1Always on
Critical
Servers, cold chain, safety systems, medical equipment.
- 2Priority
Essential
Production lines, core machinery, primary lighting.
- 3Reduced
Comfort
Air conditioning, general lighting, common areas.
- 4Deferred
Flexible
EV charging, water heating, non-urgent loads.
Running today with fleets, retailers, clinics and manufacturers.
Northline Logistics
Kaveri Clinics
Bluewheel
Sundar Retail
Orbit Mobility
Meridian Cold Chain
Vayu Motors
Akshaya Foods
From service vans to shopfronts.
Customer stories
What operators say after a year.
“The first month we ran through a full week of evening cuts without starting the genset once. The dashboard told us before we noticed.”
“We were burning diesel to cover a two-hour gap. Storage took that gap, and the fuel line went to almost nothing.”
“What sold us was the telemetry. We can see pack health across the fleet instead of guessing which vehicle is about to fail.”
Latest articles.
All blogs
Grid9 min
What a power cut is actually telling you
A bigger grid has not made the evening reliable. Here is what the interruption is usually telling you.
Industry6 min
Every battery needs an identity
Why a battery without a record is a liability, and what traceability should mean for a financed asset.
Materials7 min
The 1859 chemistry still running your backup
Why a century-old battery design keeps failing working sites, and what to look for instead.
Questions buyers ask.
The six we hear most before a site signs.
What happens if something fails at 2 AM?
Every system reports to FluidTwin around the clock. If a cell, inverter or connection looks wrong, our support team gets the alert before the site does, and the reserve policy keeps the critical loads protected while we respond.
How long does installation take?
A standard site installation is one working day. We survey the site, mount the unit, integrate it with the existing distribution board, commission it and walk your team through the app. You do not coordinate separate contractors.
We are not a large factory. Does this work for us?
Yes. FluidPod is an 8.5 kVA single-phase system with 10 to 12 kWh of usable storage, sized for shops, clinics, dark stores and small offices. It is field-expandable, so you can add capacity without replacing the first unit.
Do we have to manage the system?
No. FluidTwin decides when to charge and discharge, holds your backup reserve and handles grid participation if you enrol. Most customers open the app out of curiosity, not necessity.
When the grid returns, do we have to do anything?
No. Changeover is automatic and fast enough that servers, chillers and production equipment do not restart. When the grid is stable, the system returns to charging and peak-shaving.
You are a young company. Why trust you with critical power?
We have 9.4 MWh of storage deployed across 74 cities, with 2,800 packs in daily service. Our packs, battery management firmware and software are designed in-house, and every system is monitored by the same team that built it.
Find out what an outage costs your site.
Add your loads, pick your outage hours and see the backup you need and the diesel you stop buying. Send the result to us for a proper quote.